Default How-To: Keyfob Remote Windows Up/Down.
You will need a VDS-PRO with serial cable, that is all.
-Boot the computer into real mode dos (i.e. safe mode with command prompt) or boot from a disk containing VDS-PRO.
-Run the vag.bat file in the VDS folder
-Press ESC to cancel the auto-connect
-Connect your cable (it should not be connected before this)
-Connect to the CCM (type 46)
-Login with code 19283 (type 11)
-Look up and write down your existing memory values (type 26 and enter the addresses and values listed below)
-Change the values (type 27 and enter the addresses and values listed below)
-Close the connection (type 06)
-Test that things work as they should!
Note: The "old value" for your CCM may be different than listed below.
Codings:
CCM 1J0 959 799 AH (Any Index) and 1J0 959 799 S 03B
Memory Address / old value / new value
04283 / 8 / 2
04289 / 8 / 2
08628 / 242 / 246 driver side front window
12724 / 250 / 254 passenger side front window
16820 / 250 / 254 driver side rear window
20916 / 242 / 246 passenger side rear window
CCM 1J0 959 799 J 00E
Memory Address / old value / new value
04291 / 8 / 2
04296 / 8 / 2
08628 / 242 / 246 driver side front window
12724 / 250 / 254 passenger side front window
16820 / 250 / 254 driver side rear window
20916 / 242 / 246 passenger side rear window
CCM 1C0 959 799 A (Any Index) and 1C0 959 799 B (Any Index) for Variant/Wagon
Memory Address / old value / new value
04361 / 75 / 67
04362 / 75 / 67
04363 / 75 / 67
CCM 1C0 959 799 A (any index) and 1C0 959 799 B (any index) for Limousine/Sedan
Memory Address / old value / new value
04361 / 74 / 66
04362 / 74 / 66
04363 / 74 / 66
butabilni dos sa vds-pro
http://rapidshare.com/files/279158760/VDS-PRO_DOS6.22.iso 
