a na sta mislis da prisrafis te nosace kljesta? na glavcinu za 280mm disk?
na glavcinu od 90ks,110 ks,101ks I 116 ks idu kljesta koja se srafe u glavcinu,NEMAJU nosace kljesta.
Od 288 mm disk pa na gore imaju nosace kljesta,kao sto su na zadnjim kljestima
•Upgrading 280mm FSIII's (AKA un-moddable without major work) take a bit more work as you have to change the hubs. these can be acquired from a breaker for relatively cheap, if the bearings have a little bit of play in, thats OK they will tighten up once the driveshaft is in place. if in doubt consult a garage. You can get new bearings fitted for relatively cheap so it might be worth it in the long run to get them changed whilst they are off the car. then once you have the hubs, you will need 312mm Calipers, Carriers, Pads and Discs, and splash guards.