Storing a speed
The cruise control system is operated by means of the slide switch A and
pushbutton B in the left lever of the multi-functional switch.
– Move the slide switch A ⇒ into the ON position.
– Press pushbutton B once the required speed has been achieved.
After you have pressed press button B , the speed you have just selected is maintained
at a constant speed without having to depress the accelerator.
You can increase the speed by depressing the accelerator. Releasing the accelerator
will cause the speed to drop again to the set speed.
This does not apply, however, if you
at a speed which is more than 10 km/h
higher than the set speed for a period of more than 5 minutes. The stored speed will
be cancelled in the memory. You then have to re-store the desired speed.
One can reduce the speed in the usual manner. The system is switched off temporarily
by actuating the brake or clutch pedal
WARNING
First ensure that it is not too high for the traffic conditions which exist at that
moment before resuming the stored speed.
Changing a stored speed
You can also change the speed of the vehicle without depressing the
accelerator.
Faster
– You can increase the stored speed without depressing the accelerator
by shifting the slide switch A ⇒ to the left into the RES position.
– If you hold the button pressed in the RES position, the speed of the car
will increase continuously. Release the slide switch once the vehicle
has reached the desired speed. The set speed is then stored in the
memory.
Slower
– You can reduce the stored speed by pressing button B .
Pressing and holding down the slide switch in this postion will cause
the speed of the vehicle to be decreased continuously. Once the car
has reached the desired speed, release the button. The set speed is
then stored in the memory.
– If you release the button when the car is travelling at a speed of less
than 30 km/h, the speed is not stored, the memory is erased. It is then
necessary to increase the speed of the car to more than 30 km/h and
to once again store the speed with the pushbutton B,
Switching off the cruise control system temporarily
– You can switch off the cruise control system temporarily by
depressing the brake pedal or clutch pedal, on models with automatic
gearbox and only with brake pedal.
– You can likewise switch off the cruise control system by pushing the
switch A to the right into the intermediate position
before the position OFF. The slide switch then moves back automatically
into the ON position.
The set speed remains stored in the memory.
The Resumption of the stored speed is achieved by releasing the brake or clutch
pedal, on vehicles fitted with automatic gearbox only after releasing the brake pedal
and after shortly shifting the slide switch A to the left up to the
stop into the position RES.
WARNING
First ensure that it is not too high for the traffic conditions which exist at that
moment before resuming the stored speed.
Switching off the cruise control system completely
– Move the slide switch A up to the stop into the
OFF position.
Uploaded with
ImageShack.usEvo nasao sam uputstvo, sada ako nekoga ne mrzi da prevede i da postavi kao lepljivu, bilo bi lepo da ima, jer dosta nas ima kojima to nije bilo jasno.
I res, nije reset